Steel Cutting
We use world-class laser and plasma cutting technology, and we can cut ferrous and nonferrous materials across a broad range of thicknesses. We can cut extra-long sheets up to 12500mm.
Learn More
Channels
Channels are featured in tank stiffeners, tank supports, roof beams, circular platforms and fabricated trusses.
The table below the tightest curvature generally achievable. These figures are nominally based on 300 grade steel, and should be interpreted as indicative only.
On Edge (X-X Axis) | Toe In/Out (Y-Y Axis) | |||
Section | Min. Radii Lead | In/Out | Min. Radii Lead | In/Out |
75x40 PFC | 6000 | 450 | 300 | 500 |
100x50 PFC | 2000 | 550 | 350 | 550 |
125x65 PFC | 2100 | 650 | 500 | 500 |
150x75 PFC | 2200 | 750 | 600 | 600 |
180x75 PFC | 2400 | 750 | 700 | 600 |
200x75 PFC | 3000 | 700 | 900 | 600 |
230x75 PFC | 5000 | 700 | 1000 | 600 |
250x90 PFC | 6000 | 750 | 1200 | 750 |
300x90 PFC | 9300 | 750 | 1200 | 750 |
380x100 PFC | 19000 | 1000 | 1500 | 750 |
Beams
The universal beam applications include tanks supports, roof beams, bridge beams, cambered beams, tunnel supports, curved lifting beams (horizontal and vertical) and circular platforms.
The table below shows the tightest curvature generally achievable. These figures are nominally based on 300 grade steel, and should be interpreted as indicative only.
On Edge (X-X Axis) | Monorial (Y-Y Axis) | |||
Section | Min. Radii | Lead In/Out | Min. Radii | Lead In/Out |
100x45 TFB | 1200 | 650 | 500 | 450 |
125x65 TFB | 2500 | 650 | 600 | 500 |
150 UB 18 | 1500 | 650 | 700 | 500 |
180 UB 22 | 1300 | 700 | 900 | 500 |
200 UB 25 | 4500 | 700 | 1000 | 500 |
200 UB 30 | 22000 | 750 | 1000 | 500 |
250 UB 31 | 7000 | 750 | 1000 | 600 |
250 UB 37 | 3600 | 800 | 1000 | 700 |
310 UB 32 | 14500 | 800 | 1500 | 750 |
310 UB 40 | 8000 | 800 | 1500 | 750 |
310 UB 46 | 4800 | 950 | 1500 | 750 |
360 UB 44 | 8300 | 1000 | 2000 | 750 |
360 UB 57 | 6400 | 1000 | 2000 | 750 |
410 UB 60 | 8000 | 1000 | 2500 | 850 |
460 UB 67 | 15000 | 1000 | 2500 | 850 |
460 UB 74 | 13000 | 1000 | 2500 | 850 |
530 UB 92 | 18000 | 1000 | 2500 | 850 |
610 UB 101 | 25000 | 1000 | 3000 | 850 |
610 UB 125 | 22000 | 1000 | 2500 | 850 |
700 WB | N/A | N/A | 3000 | 850 |
1000 WB 322 | N/A | N/A | 4500 | 1000 |
Columns
This structural section has wide application in building and industrial uses, similar to the universal beam.
The table below the tightest curvature generally achievable. These figures are nominally based on 300 grade steel, and should be interpreted as indicative only.
On Edge (X-X Axis) | Monorial (Y-Y Axis) | |||
Section | Min. Radii | Lead In/Out | Min. Radii | Lead In/Out |
100 UC 14 | 1400 | 550 | 500 | 450 |
150 UC 23 | 8000 | 650 | 2500 | 600 |
150 UC 30 | 2000 | 650 | 1500 | 600 |
150 UC 37 | 1400 | 700 | 1200 | 550 |
200 UC 46 | 3900 | 850 | 3000 | 700 |
200 UC 52 | 3600 | 850 | 2500 | 700 |
200 UC 60 | 2500 | 1000 | 1500 | 700 |
250 UC 89 | 4000 | 1000 | 3000 | 700 |
310 UC 97 | 6000 | 1000 | 3000 | 850 |
310 UC 118 | 6000 | 1000 | 3000 | 850 |
310 UC 137 | 6000 | 1000 | 3000 | 850 |
310 UC 158 | 6000 | 1000 | 3000 | 850 |
Angle Iron
Angles are often used in tank stiffeners, matching flanges, curved lintels, hand rails, lagging rings, form work and fabricated roof trusses.
The table below shows the tightest curvature generally achievable. These figures are nominally based on 300 grade steel, and should be interpreted as indicative only.
Toe Out | Toe In | |||
Section | Min. Radii | Lead In/Out | Min. Radii | Lead In/Out |
25x25x3 | 150 | 150 | 200 | 200 |
50x50x6 | 250 | 250 | 350 | 300 |
75x75x6 | 450 | 400 | 500 | 350 |
100x100x6 | 1000 | 450 | 1500 | 600 |
180x75 PFC | 2400 | 750 | 700 | 600 |
100x100x10 | 450 | 500 | 650 | 500 |
125x125x6 | 1400 | 550 | 2000 | 650 |
125x125x12 | 700 | 550 | 900 | 650 |
150x150x12 | 900 | 600 | 1500 | 650 |
150x150x20 | 900 | 650 | 1000 | 700 |
200x200x13 | 3500 | 700 | 4500 | 750 |
Pipe
From striking architectural features to critical fire protection infrastructure, rolled pipe plays a vital role in both form and function.
Metal Shop Technics’s expertise in rolling large-diameter pipe enables the delivery of precision-engineered solutions that combine aesthetic appeal, structural integrity, and reliable performance.
Toe Out | ||
Section | Min. Radii | Lead In/Out |
21 OD x 2.6 | 150 | 200 |
27 OD x 2.6 | 100 | 200 |
34 OD x 3.2 | 200 | 200 |
42 OD x 3.2 | 200 | 200 |
48 OD x 3.2 | 200 | 200 |
60 OD x 3.6 | 250 | 300 |
76 OD x 3.6 | 350 | 300 |
89 OD x 4.0 | 450 | 450 |
102 OD x 4.0 | 450 | 450 |
114 OD x 4.5 | 600 | 500 |
140 OD x 4.9 | 850 | 500 |
168 OD x 6.4 | 1000 | 600 |
219 OD x 4.8 | 3000 | 700 |
219 OD x 6.4 | 1500 | 700 |
219 OD x 12.7 | 2000 | 700 |
273 OD x 6.4 | 2100 | 750 |
323 OD | CALL | CALL |
356 OD | CALL | CALL |
RHS
Metal Shop Technics bends rectangular hollow sections for curved formwork, barrel vaults, roof trusses and bridge rails.
The table below shows the tightest curvature generally achievable. These figures are nominally based on 300 grade steel, and should be interpreted as indicative only.
On Edge (X-X Axis) | Band (Y-Y Axis) | |||
Section | Min. Radii | Lead In/Out | Min. Radii | Lead In/Out |
25x25x3 | 150 | 150 | - | - |
50x25x3 | 250 | 300 | 150 | 200 |
50x50x4 | 350 | 350 | - | - |
75x50x5 | 500 | 450 | 350 | 350 |
75x75x6 | 500 | 450 | - | - |
100x50x3 | 2500 | 500 | - | - |
100x50x6 | 800 | 550 | 400 | 450 |
100x100x6 | 2500 | 600 | - | - |
100x100x9 | 1000 | 600 | - | - |
125x75x5 | 2500 | 600 | 1500 | 600 |
125x75x5 | 2500 | 600 | 1500 | 600 |
150x50x5 | 1600 | 600 | 3000 | 600 |
150x100x6 | 2200 | 600 | 1200 | 600 |
150x150x6 | 5000 | 750 | - | - |
150x150x9 | 2000 | 650 | - | - |
200x100x6 | 10000 | 800 | 10000 | 800 |
200x100x9 | 3500 | 700 | 2000 | 700 |
200x150x9 | 7400 | 750 | 6000 | 750 |
200x200x9 | 9000 | 800 | - | - |
250x150x9 | 7000 | 800 | 6000 | 800 |
Flat Bar
Flat Bars are frequently used in tank stiffeners, matching flanges, curved lintels, hand rails, curved stringers, pipe clamps and kick rails on circular platforms.
The table below shows the tightest curvature generally achievable. These figures are nominally based on 300 grade steel, and should be interpreted as indicative only.
On Edge (X-X Axis) | Band (Y-Y Axis) | |||
Section | Min. Radii | Lead In/Out | Min. Radii | Lead In/Out |
32x6 | 100 | 150 | 125 | 150 |
50x6 | 200 | 250 | 125 | 150 |
75x6 | 220 | 250 | 125 | 150 |
75x20 | 400 | 350 | 200 | 150 |
100x6 | 1000 | 450 | 125 | 150 |
100x25 | 500 | 450 | 250 | 200 |
150x10 | 1200 | 500 | 200 | 150 |
150x20 | 800 | 500 | 200 | 150 |
200x12 | 1500 | 500 | 250 | 200 |
200x25 | 700 | 600 | 200 | 150 |
200x40 | 2200 | 700 | 200 | 150 |
250x12 | 800 | 700 | 250 | 200 |
250x20 | 2000 | 700 | 250 | 200 |
250x25 | 2000 | 750 | 250 | 200 |
400x30 | 4000 | 900 | 300 | 200 |
